Your products are reserved for 9:55 minutes!
Purchase now and save .
Your item(s) may soon run out of stock!
The AMT 3" NPT Submersible Shredder Sewage Pump 5764-95 features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include: sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Motors are rated continuous duty and single phase models have thermal overload protection. Minimum liquid requirements must be above 85%. Failure to do so may cause pump damage and void warranty.
SKU |
5762-95 |
---|---|
MFR. MODEL NUMBER | 5762-95 |
PUMPING CAPACITY | 130 GPM |
MAX GPH | 7800 |
MAX TDH | 40 Ft |
MOTOR | Electric |
VAC | 230 @ 60 Hz |
PHASE | Three |
HP | 1 |
PUMP TYPE | Sewage-Septic-Drainage-Shredder-Dirty Water |
CONSTRUCTION | Cast Iron Casing /Stainless Steel Motor Housing |
DISCHARGE | 2” NPT |
FLUID MIX | Min 85% liquid required |
MAX SOLIDS | 1" |
SHAFT SEAL MATERIAL | Silicon Carbide |
WEIGHT | 50 lbs |
LENGTH | 8.9" |
WIDTH | 11.4" |
HEIGHT | 18.5" |
WARRANTY | 12 Months |
SPECS SHEET |
5762-95 Specs Sheet |
OWNER'S MANUAL & PARTS SHEET |
5762-95 Owner's Manual & Parts Sheet |
Â
Q: What is the AMT 2" NPT Submersible Shredder Sewage Pump 5760-95?
A: A heavy-duty 2" NPT submersible pump designed for sewage and wastewater applications, featuring a shredding impeller for handling solids.
Q: What is the maximum flow rate?
A: It delivers up to 130 gallons per minute (GPM).
Q: What is the motor power and voltage?
A: It has a 1HP, single-phase 115V AC motor operating at 60 Hz.
Q: What materials is it made of?
A: Constructed from cast iron and stainless steel for durability and corrosion resistance.
Q: What type of seal does it use?
A: It features a silicon carbide (S/C) seal for enhanced wear and chemical resistance.
Q: What is the purpose of the shredder mechanism?
A: It efficiently grinds solids and debris to prevent clogging, making it ideal for sewage and wastewater applications.
Q: Is this pump suitable for continuous operation?
A: Yes, it is designed for continuous-duty sewage and wastewater pumping.
Q: Does it require special installation?
A: It is submersible and typically requires proper wiring and discharge piping for efficient operation.
Q: Is there a warranty?
A: AMT typically provides a limited warranty—check with the manufacturer for specific details.