Atlas 9KOHX 9,000 lb Overhead 2-Post Lift w/ LMA Combo - ATEXH-9KOHX-COMBO-FPD
The light duty Atlas 9KOHX lift is an economy designed overhead, clear-floor 2-post lift. The reliable chain-drive cylinders and dual safety system make this the perfect choice for “Mr. Homeowner” or small commercial shops looking to service cars, SUV’s and light duty trucks. The 9KOHX can be adjusted to two different height settings, either 11′ 6″ or 11′ 10″, allowing it to fit in almost any standard garage.The Atlas 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks. The Atlas® 9KOHX two post “chain over roller” lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.This combo includes the Atlas Lawn Mower Adapter or LMA. The LMA allows the 2-Post lift to better raise ATV’s, UTV’s, and lawn mowers. The LMA is adjustable along the length of the lifts arms to handle different wheelbase vehicles. The weight capacity of the LMA is dependent on the positioning of the adapter (higher when the plates are closer to the columns) and the balance of the weight of the vehicle being lifted.
Features
9KOHX
- 9,000 lb. Capacity
- Overhead, Open-Floor design
- Overall Height: 138″ (11′ 6″) or 142″ (11′ 10″)
- Asymmetric/Symmetric Arms
- Automatic Arm Restraints
- Dual-Point Lock Release
- Rubber Guards on Carriages
- Dual Hydraulic Chain-Drive Cylinders
- Secondary Lock System
- Free 8 Piece Truck Adapter Set
- Free set of Sliding Arm Adapters
- Mounting Hardware Included
- Shipping Weight: 1,450 lbs.
- 2 yr Structural – 1 yr Hydraulic Warranty – Parts Only
LMA
- “Lawnmower” Adapter for 2-Post Lifts
- Includes 4 plates and all hardware
- Adjustable to fit a variety of sizes and brands (MAY NOT WORK WITH ALL LIFTS)
- Up to 5,000 lb. capacity (WILL VARY BY LIFT AND WHEEL BASE)
- Can be positioned along the length of the lift arms (LEVELING BLOCKS MAY BE REQUIRED)
Specifications
| Capacity |
9,000 LB. |
| Overall Height |
138" (11’ 6") or 142” (11’ 10”) |
| Overall Floor Width |
134 1/2" (11’ 2 1/2") |
| Outside Column to Outside Column |
124 7/8" (10’ 4 7/8") |
| Maximum Lift Height (Without Adapters) |
74 1/2" |
| Maximum Lift Height (With Adapters) |
81" |
| Minimum Arm Height |
4" |
| Inside Column |
110” (9’ 2”) |
| Drive Thru |
100” (8’ 4”) Symmetric/ 90 1/2" (7’ 6 1/2”) Asymmetric |
| Column Size |
7 1/4" x 11" |
| Column Thickness of Steel |
5mm |
| Base Of Lift |
14 1/4" x 18" |
| Motor/Electrical Requirement |
220 volt single (1) phase.
A 30 amp breaker is recommended |
| Oil Requirement |
3-5 Gallons AW32/AW46 (NOT INCLUDED) |
| Shipping Weight |
1,450 LBS. |
| Adapter Heights |
4 Each 1.5”, 5” |
| Arm Hole/Adapter Peg Size |
1.5” |
Documents
Atlas 9KOHX Manual
Atlas 9KOHX Cylinder Bleeding Procedure
(Do this immediately after installation)
What Our Experts Think
-
9,000 lb Capacity: Ideal for cars, SUVs, and light-duty trucks.
-
Overhead Design: Keeps the floor clear for easy movement and tool access.
-
LMA (Low-Mid Adapter) Combo: Increases versatility for lifting a wider range of vehicles.
-
Symmetric & Asymmetric Arms: Provides flexible vehicle positioning options.
-
Heavy-Duty Construction: Built for durability in professional shops and garages.
-
Advanced Safety Features: Automatic safety locks ensure secure lifting.
Q&A
Q: What is the weight capacity of the Atlas 9KOHX lift?
A: It has a 9,000 lb capacity, ideal for cars, trucks, and SUVs.
Q: What does the LMA Combo include?
A: The package includes Lift-Mate Adapters (LMA), which provide additional reach for lifting vehicles with unibody construction or recessed lift points.
Q: What type of lift is this?
A: It is an overhead (clear floor) 2-post lift, allowing for an open workspace beneath the vehicle.
Q: What is the maximum lifting height?
A: It lifts vehicles up to approximately 78 inches, making it suitable for most professional and home garages.
Q: What power supply is required?
A: It operates on a 220V single-phase power supply.
Maintenance Tipe
-
Daily Inspection – Check for hydraulic leaks, loose bolts, and worn cables or chains.
-
Lubrication – Grease pulleys, chains, and moving parts monthly.
-
Hydraulic System – Monitor fluid levels and inspect hoses for cracks or leaks.
-
Safety Locks – Ensure lock mechanisms engage properly and are free of debris.
-
Cable & Chain Tension – Regularly inspect and adjust for even wear.
-
Annual Check-Up – Conduct a full system inspection and replace worn components.
