BJM JX750SS-115 2" Stainless Steel Submersible Pump - 201226
BJM JX750SS115 2" Stainless Steel Submersible Dewatering Pump Proven construction for pumping liquids that corrode cast iron submersible pumps.
Features
- Ideal for dewatering construction sites, mines, circulating fountain water, or for all around use in industrial plants and utilities
- 316 Stainless Steel Dewatering pump side discharge
- Made of cast 316 Stainless Steel, with no welds, are rated A or B, (excellent or good) for corrosive resistance. (Pumps made of Cast Iron are rated D or F.)
- 304SS motor housing; superior to pumps with aluminum housings that wear out pumping sandy water
- Hardened cast iron impellers and volutes; superior to pumps with plastic impellers that erode or plastic pump bodies that crack from rough handling
- 1 HP, 115Volts, single phase, 14 Full Load Amp
- Class F motor insulation handles higher temperatures without degrading motor life better than pump motors with Class A, E or B insulation
- 3 seals: Lip seal, (2) mechanical seals; silicon carbide and carbon/ceramic
Specifications
| MAX. FLOW: GPM |
91 gpm |
| MAX. HEAD: ft |
50 ft |
| PUMP TYPE |
Elec. Submersible, Side Discharge, Dewatering |
| STRAINER OPENING |
1/4" |
| DISCHARGE CONNECTION |
2" NPT-M |
| SHIPPING WEIGHT |
66 lbs |
| MECHANICAL SEAL UPPER |
Crb / Cer |
| MECHANICAL SEAL LOWER |
Crb /Cer |
| MOTOR CASING |
304 SS |
| PUMP VOLUTE |
Cast Iron |
| IMPELLER-MULTI VANE |
Cast Iron |
| STRAINER |
304 SS |
| LIPSEAL & O-RINGS |
Buna-N |
| ROTOR SHAFT |
304 SS |
| EXTERNAL HARDWARE |
304 SS |
| QTY. OIL IN SEAL CHAMBER |
2.7 U.S. fl. oz. |
What Our Experts Think
-
Corrosion-Resistant Build – Stainless steel construction ensures durability in harsh environments.
-
High-Performance Pumping – Efficiently handles water and light slurry applications.
-
Fully Submersible – Designed for continuous operation in demanding conditions.
-
Versatile Applications – Ideal for wastewater, construction, and industrial use.
-
Reliable & Low Maintenance – Built for long-lasting performance with minimal upkeep.
Q&A
Q: What is the BJM JX750SS-115 Submersible Pump used for?
A: It is designed for pumping corrosive and abrasive liquids in industrial, construction, and wastewater applications.
Q: What is the pump's capacity?
A: It has a 2-inch discharge and delivers high-performance water movement.
Q: What material is the pump made of?
A: It is constructed from 316 stainless steel for superior corrosion resistance.
Q: Is this pump suitable for harsh environments?
A: Yes, it is built to withstand extreme conditions, including acidic and abrasive liquids.
Q: What type of motor does it use?
A: It features a 115V, ¾ HP motor for efficient and reliable operation.
Maintenance Tips
-
Regular Cleaning – Rinse the pump exterior and impeller to prevent debris buildup.
-
Inspect Seals & Cables – Check for wear or damage to seals and power cables. Replace if necessary.
-
Monitor Performance – Listen for unusual noises and check for reduced flow, which may indicate clogging or wear.
-
Lubricate Bearings – Ensure bearings are properly lubricated to prevent overheating.
-
Check Motor & Voltage – Verify voltage levels match specifications and inspect the motor for overheating signs.
-
Store Properly – If not in use, clean and store in a dry, cool place to prevent corrosion.
