BJM SV400-115 2" Submersible Pump - 201528
BJM SV400-115 2" Vortex Trash Submersible PumpThe SV family of pumps from BJM offer long life and trouble free performance at a low investment cost. Motor Casing, impeller shaft and all hardware are made of 304 Stainless Steel, with impeller and other exposed parts made of cast-iron. Each pump is tested at the factory for performance as well as safety.
Features
- For non-clog, solids handling pump for sludge, sewage, trash & industrial waste
- Recessed vortex impeller pumps for passing large solids found in sewage and industrial waste
- SV pumps are designed to pass mud, raw sewage, leaves, rags, wood chips and other solids without clogging
- Constructed with a cast iron volute and fully recessed impeller for pumping solids without clogging
- Rugged construction (no breakable plastic component) and light weight for portability
- Lip Seal and double mechanical seals
- Lower seal is silicon carbide/silicon carbide and upper seal is carbon/ceramic
- Built in high temperature automatic overload switch and class F motor insulation protects against motor failure due to overheating
- 1/2 HP, 110V, single phase, 7.5 Full Load Amp
- Max Solids 1-1/2"
Specifications
| MAX. FLOW: GPM |
59 gpm |
| MAX. HEAD: ft |
22 ft |
| PUMP TYPE |
Elect.Submersible, Non-Clog Vortex |
| DISCHARGE CONNECTION |
2" NPT-M (45° elbow) |
| SHIPPING WEIGHT:lbs |
40 lbs |
| MECHANICAL SEAL UPPER |
Crb / Cer |
| MECHANICAL SEAL LOWER |
Sic / Sic |
| MOTOR CASING |
304 SS |
| PUMP VOLUTE |
Cast Iron |
| IMPELLER-MULTI VANE |
Cast Iron |
| LIPSEAL & O-RINGS |
Buna-N |
| ROTOR SHAFT |
304 SS |
| EXTERNAL HARDWARE |
304 SS |
| QTY. OIL IN SEAL CHAMBER |
1.35 U.S. fl. oz. |
What Our Experts Think
-
Reliable Water Pumping – Effectively removes water in demanding job site conditions.
-
Durable Construction – Built to withstand harsh environments for long-lasting use.
-
Fully Submersible – Designed for continuous operation in wet and submerged settings.
-
Versatile Applications – Ideal for construction, mining, and wastewater management.
-
115V Power Compatibility – Convenient for standard job site power setups.
Q&A
Q: What is the BJM SV400-115 Submersible Pump used for?
A: It is designed for dewatering applications in construction, industrial, and wastewater environments.
Q: What is the discharge size?
A: It features a 2-inch discharge for efficient water removal.
Q: What type of motor does it have?
A: It has a 115V, ½ HP motor for reliable performance.
Q: Can this pump handle solids?
A: Yes, it is designed to manage water with debris, making it ideal for tough job sites.
Q: Is it corrosion-resistant?
A: Yes, it is constructed with durable materials to withstand harsh conditions.
Q: Does it have thermal overload protection?
A: Yes, it includes built-in thermal protection to prevent overheating and extend motor life.
Maintenance Tips
-
Keep Intake Clean – Regularly clear debris to maintain peak performance and prevent clogging.
-
Inspect Seals & Cables – Check for cracks, wear, or leaks and replace damaged components promptly.
-
Monitor Pump Operation – Look for unusual noises, reduced flow, or overheating as signs of maintenance needs.
-
Lubricate Bearings – Ensure bearings are properly lubricated to reduce friction and prolong lifespan.
-
Check Power Supply – Verify the 115V power connection is stable and within the required specifications.
-
Store Correctly – Clean and dry the pump before storage to prevent rust and corrosion.
