Only a few left—secure yours before it’s gone for good!
Your items are reserved, but only for a limited time!
Grab it now at a discounted price before the deal ends!
$1,317.99 USD
$1,227.99 USD
$1,508.99 USD
The Innovative WH85 Professional Series Whole House Dehumidifier removes up to 85 pints of moisture per day at AHAM (80 degrees F, 60% RH) conditions on spaces up to 1,900 square feet (or 15,000 cubic feet). With easy installation and user-friendly features, this whole home dehumidifier packs a lot of performance in a small package.
Fast and Easy Installation
Because the WH85 Professional Series Innovative Dehumidifier can be plugged into a dedicated 15-amp GFCI-protected circuit, setting it up is truly simple. This whole-house dehumidifier can also be hard-wired if desired.
This Innovative Dehumidifier system has a simple control panel for powering the dehumidifier on, setting the desired humidity level, and selecting the operating mode. Once the humidity setpoint is determined, the WH85 will work to maintain the desired level.Â
To quickly remove accumulated moisture or reduce high humidity, you can set the humidity level below 36 percent RH and allow this whole-house dehumidifier to run continually until your space is comfortable and dry. Then, set the RH above 36 percent to the preferred maintenance level, and the dehumidifier will switch back to normal operation.
| Internal Condensate Pump | No |
|---|---|
| Manufacturer-Suggested Room Size | 1900 sq. ft. |
| Sylvane’s Suggested Room Size | 2600 sq. ft. |
| Number of Speeds | 1 |
| Pint Capacity | 85.0 pints |
| Certifications | ETL |
| Color | Gray |
| Controls | Manual |
| Drain Hose Diameter | 0.75 in. |
| Drain Hose Length | 12 ft. |
| Fan Operation | Runs Only When Dehumidifying |
| Filter Type | MERV-10 |
| Lowest Operating Temp. | 40°F |
| Maximum CFM | 201 CFM |
| Noise Level | 59 dB |
| Number of Filters | 1 |
| Recommended For | Crawlspace, Basement, Garage/Workshop, Large/Multi-Room, Education & Government Facilities |
| Refrigerant Type | R-32 |
| Maximum Amperage | 5.3 A |
| Maximum Wattage | 600 W |
| Power Cord Length | 10 ft. |
| Power Supply | Plug, 110–120 V |
| Dimensions (H x W x D) | 12.0" x 12.0" x 21.7" |
| Weight | 56 lbs. |
| Additional Features | Continuous Drain Capable, Drain Hose Included, Humidistat, Low Temperature Operation (41°F & Under), Automatic Defrost, Ductable, Auto-Restart |
Whole-House Coverage – Designed to manage humidity across large spaces for consistent comfort.
High-Capacity Performance – Effectively removes excess moisture to prevent mold and mildew.
Energy Efficient – Built for continuous operation with lower energy costs.
Quiet & Reliable – Operates with minimal noise for discreet home use.
Innovative Design – Engineered for durability and long-term indoor air quality improvement.
Q: What is the capacity of the WH85 dehumidifier?
A: It removes up to 85 pints of moisture per day, making it ideal for whole-house humidity control.
Q: What size space can it handle?
A: Designed for spaces up to 7,000 sq. ft., perfect for large homes or basements.
Q: Is it energy efficient?
A: Yes, the WH85 is Energy Star® certified, helping reduce energy costs while maintaining comfort.
Q: How is it installed?
A: It can be ducted into your HVAC system or used as a standalone unit, offering flexible installation.
Q: Does it improve air quality?
A: Yes, by reducing excess humidity, it helps prevent mold, mildew, and allergens for healthier indoor air.
Clean or replace the air filter every 3–6 months for optimal airflow.
Inspect and clean the condensate drain line regularly to prevent clogs.
Wipe down exterior vents and grilles to keep dust-free.
Ensure unit is placed in a level, well-ventilated area.
Schedule annual professional servicing to maintain peak efficiency.
Monitor humidity settings and adjust seasonally for best results.